How to make fire with a pump drill?

In recent times, people can make the most of their camping because there are high-tech stoves or ovens or even barbeque machines to make hot and crispy grills. But 50 years ago what people do to make grills or enjoy their camping? Without these machines, what did they do to make fire?

Now, to find out the answers of these questions, you have to go back to the past time when people utilized the primitive ways to make fire, especially with a pump drill. Let’s have an in-depth look how people made fire with a pump drill.

Acient Pump Drill

What are the primitive methods to make fire?

  • Hand Drill
  • Two-Man Friction Drill
  • Fire Plough
  • Pump Fire Drill
  • Bow Drill
  • Fire piston
  • Flint and Steel

What to consider when selecting a fire making method?

When you are selecting a method to make fire, you should consider the following factors:

  • The available resources
  • The available time
  • The amount of energy that you want to spend to make fire

What is a pump drill?

The pump drill was invented by the Iroquois. It is an ingenious tool that utilizes the flywheel to produce friction. Usually, the flywheel and crossbar is made of hardwood. Additionally, the fireboard and the spindle are created with softwoods. What’s more, this primitive fire making tool has a shaft that has developed while working up as well as down a bow or bar, which carries an attached cord at the main point to the upper end of the shaft.

pump drill
This is the pump drill – Source: makezine.com

Furthermore, the pump drill is used to make fire from a very ancient time. The friction heat that is generated in a pump drill makes the fire and also it is used for boring holes. The mechanism behind a pump drill is easy-to-understand, but sometimes, it is hard to explain. Besides, the pump drill is quite similar to the button of a spinner or whirligig where the momentum is made and kept through recurrent winding and unwinding of a cord.

As stated earlier that a pump drill is an old-aged tool, it was regularly manufactured and used until the early 20th century. Also, the tool was used by people of the different profession like – metal workers, jewellers, silversmiths, watchmakers, etc. Their primary objective was to bore tiny holes in homogenous materials such as precious metals, stone, and brass.

How to make fire with a pump drill?

Constructing a pump drill is a complex procedure because mechanically, it is complicated. However, this complexity is coincided with easy fire making. Once the pump drill is constructed, there will be little or no effort required for making the fire. So, let’s take a look at the steps to make fire with a pump drill:

  • First, you have to find a piece of hardwood and then cut to make a little hole at the center of the wood. Also, you will use the sinew, cordage, or paracord, you attach a razor-sharp rock to the last part of a hardwood stick.
  • Afterwards, you have to put in the rounded piece of wood onto the stick and the position of the wood will be one inch above the rock. It will allow the wood to keep in an upward position. Note that, it should fit freely so that the device can be rotated within of it.
  • Next up, you will again find out a slightly rounded piece of hardwood and drill a hole into it through the central area, which will have the same width as the stick.
  • Now, you will make a drill through the rock with a same width of the stick and push the stick into the hole. Keep in mind that the arrow needs to be kept at least one or two inches under the rock. Without moving, the rock should fit in comfortably.
  • First, you have to find a piece of hardwood and then cut to make a little hole at the center of the wood. Also, you will use the sinew, cordage, or paracord, you attach a razor-sharp rock to the last part of a hardwood stick.
  • In the next step, you should scratch two notches on the last part of each side of the curved wood. It will permit you to attach a string around it. In addition to this, you will tie a portion of sinew cordage or paracord to interlink the edge of each side of the curved wood to the angle of the stick, but away from the arrow’s direction.
  • In the last phrases, you will take hold of the curved wood as a handle and then press the arrow to the hole into the firewood. After that, just spin the devices to twist it in the upper direction.
  • Lastly, you will let the device untwist itself and since the arrow is moved towards the fireboard, embers will be created and thus, the fire will be made.

This video sums up nicely all the steps mentioned above. Feel free to go through it at your own pace.

Safety tips for making fire with a pump drill

  • Make fire in a safe environment
  • Keep an extinguisher while making fire
  • Consider the wind direction and strength beforehand
  • Never leave the fire on
  • Keep the phone with the emergency service numbers

Conclusion

Making fire without matches is easy, especially with a pump drill. All you need to do is construct the fire drill in a proper way and follow the above steps of pump drill fire making process. So, practice the steps regularly and make fire with a pump drill easily. Read more about the best drill press here

References